E81T1-NI2 CO2 gas heat flux cored wire used in titanium slag system
|Package||Specification||Silk panel||Net weight|
|Φ1.0~1.6(mm)||D100mm D200mm D270mm D300mm K300mm||1 kg, 5 kg, 15 kg, 18 kg, 20 kg|
|Chemical Wire Element(%)||C||Mn||Si||P||S||Cr||Mo|
|Deposited metal Mechanical properties||Yield strengthσ0.2(Mpa)||Tensile strengthσb(Mpa)||Elongationδ5(%)||AKV Impact Energy(J)|
|Wire diameter(mm)||φ1.2||φ1.4||φ1.6||Welding position|
|Notes::||1 wire into the plant must be stored in a dry environment, not just open the disk waterproof wire welding package 2 should be removed before welding surface of the oil, rust, moisture and other impurities
3. The use of CO2 gas, CO2 gas purity of 99.98%.
4 CO2 protection welding gas flow should be controlled in 20-25L/min.
5 out of wire length should be controlled at 15-25mm range.
6 to be preheated before welding to 150-300 ℃, after welding to be tempered by 700-740 ℃.
The loyalty is our insisting thing .We have been recognized and praised by companies such as HYUNDAI, GOLD, BESTWEL, WELDFAST ITCE, SINO-AMERICA, etc. Hope you can become our next loyal partner
Write your message here and send it to us